| MRC |
Requirement Statement |
Characteristics |
| AAFZ |
BODY MATERIAL |
ALUMINUM ALLOY, QQ-A-596, ALLOY 356, T6 |
| ABDR |
MOUNTING PROVISION |
PIN |
| CLMY |
PORT THREAD QUANTITY PER INCH |
20 |
| CLMQ |
MOUNTING FACILITY DIAMETER |
0.2495 INCHES MINIMUM 0.2500 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
77272-114HS105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CLNB |
PORT THREAD CLASS |
3B |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ATEM |
EXTENDED LENGTH |
13.000 INCHES NOMINAL |
| CLLN |
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY |
INCLUDED |
| CLMT |
PORT STYLE |
GASKET SEAL |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT 275.0 DEG FAHRENHEIT |
| CLND |
BLEEDING FEATURE QUANTITY |
1 |
| CLMS |
PORT LOCATION AND QUANTITY |
2 CENTER SECTION 1 PISTON ROD END |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CLMX |
PORT THREAD DIAMETER |
0.438 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.940 INCHES NOMINAL |
| CKSF |
FIRST PISTON ROD END STYLE |
BEARING TYPE |
| AJFY |
SEAT ANGLE IN DEG |
45.0 |
| ADAR |
BODY OUTSIDE DIAMETER |
1.840 INCHES MAXIMUM |
| CLML |
MOUNTING TYPE AND LOCATION |
TONGUE CYLINDER HEAD END |
| SR-1 |
MANUFACTURERS CODE |
77272 |
| SR-5 |
DESIGN CONTROL REFERENCE |
18050-10 |
| CLLZ |
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY |
NOT INCLUDED |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS105 FSCM 77272 |
| AFLW |
ACTUATION METHOD |
DIRECT |
| CLMW |
PORT THREAD SERIES DESIGNATOR |
UNF |
| BMWH |
RESERVOIR TYPE |
REMOTE |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
114HS105-6 |
| ABKP |
MOUNTING FACILITY LENGTH |
1.440 INCHES NOMINAL |
| AMQZ |
COMPRESSED LENGTH |
11.500 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
99643 |
