| MRC |
Requirement Statement |
Characteristics |
| CPHM |
FORWARD END DESIGN |
TAPERED |
| CPTT |
FORWARD END TAPER MAJOR DIAMETER |
1.750 INCHES NOMINAL |
| MATL |
MATERIAL |
STEEL, CORROSION RESISTING |
| BPJZ |
USAGE LOCATION |
INBOARD/OUTBOARD |
| ABET |
THREAD LENGTH |
1.315 INCHES |
| ARQS |
CONSTRUCTION |
SOLID |
| AAZR |
MAJOR DIAMETER |
1.250 INCHES NOMINAL |
| CPNF |
THREADED FORWARD END |
INCLUDED |
| CPNH |
FORWARD END THREAD QUANTITY |
14 PER INCH |
| ABHP |
OVERALL LENGTH |
7.417 FEET NOMINAL |
| CPTC |
AFTER END DESIGN |
TAPERED |
| ABND |
TAPER LENGTH |
0.417 FEET NOMINAL |
| CPJG |
AFTER END KEYWAY |
PROVIDED |
| ABKV |
OUTSIDE DIAMETER |
1.750 INCHES NOMINAL |
| ABQB |
TAPER MAJOR DIAMETER |
1.750 INCHES NOMINAL |
| ABRR |
KEYWAY WIDTH |
0.437 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AGYE |
SURFACE FINISH |
SMOOTH MACHINED |
| CPTD |
THREADED AFTER END |
INCLUDED |
| CPNC |
FORWARD END TAPER LENGTH |
0.292 FEET NOMINAL |
| CTKF |
TAPER |
0.726 PER FOOT IN INCHES MINIMUM AND 0.728 PER FOOT IN INCHES MAXIMUM |
| CPNJ |
FORWARD END THREAD LENGTH |
1.060 INCHES |
| AEVE |
KEYWAY QUANTITY |
1 |
| AEJZ |
DEPTH |
0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| CTMS |
FORWARD END TAPER |
0.7500 PER FOOT IN INCHES MINIMUM AND 0.7519 PER FOOT IN INCHES MAXIMUM |
| NMBR |
QUANTITY |
1 |
| ABGL |
WIDTH |
0.437 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| CPJF |
FORWARD END KEYWAY |
PROVIDED |
| CPNG |
FORWARD END MAJOR DIAMETER |
0.875 INCHES NOMINAL |
| ABRV |
KEYWAY DEPTH |
0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| APQB |
UNIT TYPE |
PROPELLER SHAFT SECTION |
| AZRW |
THREAD QUANTITY |
7 PER INCH |
