| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 1091047-3 | ITT CORPORATION | 28527 | 5 | 2 | 2 | ||||
| 4SD1194 | MOOG INC. | 99932 | D | 9 | 2 | ||||
| SD1194-3 | MOOG INC. | 99932 | 5 | 9 | 2 | ||||
| SD1194-3 | MOOG INC. | 1K426 | 3 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 416,COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.374 INCHES |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| SR-5 | DESIGN CONTROL REFERENCE | SD1194-3 |
| SR-5 | MANUFACTURERS CODE | 1K426 |
| CWRM | FACE NOMINAL WIDTH | 0.050 INCHES |
| SR-5 | THE MANUFACTURERS DATA | |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AGJS | PITCH DIAMETER | 0.3522 INCHES MINIMUM AND 0.3527 INCHES MAXIMUM |
| CWTX | HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END |
| AJLA | TEETH QUANTITY | 34 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
