| MRC |
Requirement Statement |
Characteristics |
| MATT |
MATERIAL |
STEEL COMP 1031 OVERALL |
| CQFM |
HARDNESS RATING |
58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM BODY 60.0 ROCKWELL C MINIMUM TEETH |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| SFTT |
SURFACE TREATMENT |
CHROMIUM AND OXIDE OVERALL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.271 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWWH |
END NOMINAL LENGTH |
0.355 INCHES SECOND END |
| CWQD |
PITCH ANGLE |
34.8833 DEGREES |
| CWFR |
NOMINAL OVERALL LENGTH |
2.880 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2406 ASSN STD 1ST TREATMENT RESPONSE AND AMS 2485 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
2.1140 INCHES NOMINAL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.985 INCHES SECOND END |
| STYL |
STYLE DESIGNATOR |
SIDE FACE, BACK HUB PROTRUDING |
| AJLA |
TEETH QUANTITY |
23 |
| ABSA |
SPLINE QUANTITY |
12 SECOND END |
| BDTX |
SPLINE PITCH DIAMETER |
0.6000 INCHES NOMINAL SECOND END |
| CWWN |
END NOMINAL DIAMETER |
0.938 INCHES SECOND END |
| FEAT |
SPECIAL FEATURES |
HUB END IS THREADED,0.938-20 UNEF-3A,AND HAS TWO AXIAL SLOTS DIAMETRICALLY OPPOSITE FROM EACH OTHER |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.438 INCHES FIRST END |
| ANTP |
BORE STYLE |
PARTIAL FIRST END INVOLUTE SPLINE SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.730 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CWWS |
FIRST STEP NOMINAL LENGTH |
1.535 INCHES SECOND END |
| CWNM |
TOOTH DIRECTION |
RIGHT |
| CWMW |
TEETH TYPE |
SPIRAL |
| CWRX |
BORE NOMINAL DEPTH |
1.130 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.890 INCHES SECOND END |
| CWRM |
FACE NOMINAL WIDTH |
0.500 INCHES |
