| MRC |
Requirement Statement |
Characteristics |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| MATT |
MATERIAL |
STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP 4130 OUTER RING PLASTIC POLYTETRAFLUOROETHYLENE SEAL STEEL COMP 4130 SHAFT |
| CQJX |
NOMINAL THREAD SIZE |
0.437 INCHES |
| ABHP |
OVERALL LENGTH |
3.0480 INCHES MINIMUM AND 3.0780 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAJD |
THREAD CLASS |
3A |
| AGVT |
OUTER RING WIDTH |
0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AGGY |
SHANK THREAD LENGTH |
1.5320 INCHES MINIMUM AND 1.5940 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.4375 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| AGVU |
INNER RING WIDTH |
0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| ADGA |
OVERALL OUTSIDE DIAMETER |
1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| SFTT |
SURFACE TREATMENT |
CADMIUM OUTER RING CADMIUM ROD END BODY |
| AGYJ |
SEAL QUANTITY |
2 |
| ABXV |
BORE DIAMETER |
0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
