| MRC |
Requirement Statement |
Characteristics |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-17505 GOVERNMENT SPECIFICATION |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OXIDATION RESISTANT AND OZONE RESISTANT |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 1ST END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRONZE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER, CHLOROPRENE 2ND LAYER RUBBER IMPREGNATED WOVEN FABRIC 3RD LAYER HELIX WIRE COIL 4TH LAYER RUBBER IMPREGNATED WOVEN FABRIC OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| CQBD |
BURST TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M17505A32500 |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-H-17505 |
| CRSM |
VACUUM IN TORR |
254.0 |
| AHNX |
BOLT HOLE DIAMETER |
0.750 INCHES NOMINAL 1ST END |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKG |
BOLT CIRCLE DIAMETER |
7.500 INCHES NOMINAL 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
300.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| AHNC |
CONNECTION STYLE |
PLAIN 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| AECS |
BOLT HOLE QUANTITY |
8 1ST END |
| AARX |
INSIDE DIAMETER |
4.000 INCHES NOMINAL |
