| MRC |
Requirement Statement |
Characteristics |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| ANEE |
GRIP LENGTH |
2.302 INCHES MINIMUM AND 2.322 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS336 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
2.937 INCHES MINIMUM AND 2.984 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASA |
THREAD LENGTH |
2.694 INCHES MINIMUM AND 2.824 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES NOMINAL FIRST HOLE |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 8735 OVERALL |
| AASL |
HEAD DIAMETER |
0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| AAWU |
SINGLE SHEAR STRENGTH |
10500 POUNDS PER SQUARE INCH |
