| MRC |
Requirement Statement |
Characteristics |
| SR-5 |
DESIGN CONTROL REFERENCE |
255711 |
| AAUB |
HOLE DIAMETER |
0.065 INCHES NOMINAL |
| AASB |
FASTENER LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
2 |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
SILVER OVERALL |
| AATC |
EXTENDED WASHER DIAMETER |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.125 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CFSG |
NONSTANDARD THREAD PITCH DIAMETER |
0.2800 TO 0.2824 INCHES |
| SR-5 |
MANUFACTURERS CODE |
77445 |
| AATD |
EXTENDED WASHER THICKNESS |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| CRHC |
HOLE CONFIGURATION STYLE |
DOUBLE HEXAGON LONGITUDINAL HOLE |
| AASA |
THREAD LENGTH |
0.375 INCHES MINIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.247 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |
| BQDM |
HOLE TYPE |
DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
