| MRC |
Requirement Statement |
Characteristics |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.840 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
122.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-22750,CL 1,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLH |
SECOND LEG END WIDTH |
0.300 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.840 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.900 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.370 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.170 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.150 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,TH34 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| SR-5 |
MANUFACTURERS CODE |
96214 |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
716488-2 |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.120 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.205 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| FEAT |
SPECIAL FEATURES |
SECOUND LEG HAS ADDITIONAL SLOT,BOTH SLOTS SAME SIZE,0.500 IN. CTO C ON BSC |
