| MRC |
Requirement Statement |
Characteristics |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.15 INCH-OUNCES |
| AAVM |
PILOT LENGTH |
0.06200 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
3 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
1.062 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.06200 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
90.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.753 INCHES NOMINAL |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
90.0 SINGLE SECTION AND 180.0 SINGLE SECTION AND 270.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TURRET |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0 TO 20.0 SINGLE SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.0005 INCHES |
| ABHP |
III OVERALL LENGTH |
1.253 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-2.5 TO 2.5 DEG ANGULAR ROTATION SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 KILOHMS SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ABPA |
UNDERCUT DIAMETER |
0.975 INCHES MAXIMUM |
| ADAV |
III OVERALL DIAMETER |
1.438 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.06200 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
1.06200 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
10001-2267384 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AEGA |
LATERAL RUNOUT |
0.001 INCHES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50 TO 0.50 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.15 INCH-OUNCES |
| AAPN |
SECTION QUANTITY |
1 |
| ABWV |
SHAFT DIAMETER |
0.1248 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| AAVL |
PILOT DIAMETER |
0.96880 INCHES NOMINAL |
