| MRC |
Requirement Statement |
Characteristics |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
3 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.790 INCHES MAXIMUM |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
700.0 SINGLE SECTION AND 700.0 SINGLE SECTION AND 700.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.800 KILOHMS SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TURRET |
| ABWV |
SHAFT DIAMETER |
0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| AAVL |
PILOT DIAMETER |
0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-5.0 TO 5.0 OHMS SINGLE SECTION |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 FREE AIR SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
85374-277356 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CBME |
III CUBIC MEASURE |
0.481 CUBIC INCHES |
| AAPN |
SECTION QUANTITY |
1 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
0.781 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.562 INCHES NOMINAL |
