| MRC |
Requirement Statement |
Characteristics |
| AEBD |
TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS |
-15.0 TO 15.0 SINGLE SECTION |
| AFWW |
TERMINAL WIDTH |
0.047 INCHES NOMINAL |
| CTGS |
III CAPACITANCE DRIFT IN PICOFARADS |
0.04 SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.441 INCHES MINIMUM AND 0.465 INCHES MAXIMUM |
| CTGR |
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY |
1 SLOTTED SCREW |
| AXHA |
III PLATE AIR GAP |
0.010 INCHES |
| AECJ |
III QUALITY FACTOR AT 25 DEG CELSIUS |
2000.0 |
| CTGP |
NONDERATED VOLTAGE RATING AND TYPE |
650.0 AC PEAK SINGLE SECTION |
| CTGN |
CAPACITANCE RANGE IN PICOFARADS |
1.8 TO 16.7 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 PRINTED CIRCUIT |
| AXGT |
III INSULATION DC RESISTANCE AT 25 DEG CELSIUS |
100000.0 MEGOHMS |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.343 INCHES NOMINAL |
| AFWY |
TERMINAL THICKNESS |
0.016 INCHES NOMINAL |
| AEBC |
TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS |
45.0 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
0.641 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.067 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
PLATE-MESHING |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
0.291 INCHES MINIMUM AND 0.299 INCHES MAXIMUM |
| ATPA |
III PLATE QUANTITY |
14 |
| AXGJ |
ADJUSTMENT DEVICE ROTATION |
180.0 DEGREES NOMINAL CLOCKWISE |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| ABJT |
TERMINAL LENGTH |
0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| MATT |
III MATERIAL |
BRASS CAPACITIVE ELECTRODE STEATITE BASE |
| ABMK |
OVERALL WIDTH |
0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AKNA |
INCLOSURE TYPE |
UNINCLOSED |
| AXGR |
ADJUSTMENT DEVICE TORQUE |
2.500 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| AXCM |
TUNING CHARACTERISTIC |
STRAIGHT LINE CAPACITY SINGLE SECTION |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
METAL SURFACES SILVER |
