| MRC |
Requirement Statement |
Characteristics |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
5.250 INCHES NOMINAL |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
135.0 ALL LOCATIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
1.380 INCHES NOMINAL |
| CRCF |
TRIP RELEASE AMBIENT TEMP RATING |
40.0 DEG CELSIUS NOMINAL ALL LOCATIONS |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
20.0 AMPERES AC ALL LOCATIONS |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
WC375/12-003 |
| AJEC |
BOSS HEIGHT |
0.250 INCHES NOMINAL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
CORROSION RESISTANT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC ALL LOCATIONS |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE TWO |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| CPRQ |
RESET METHOD |
MANUAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-W-C-375/12 GOVERNMENT SPECIFICATION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.188 INCHES NOMINAL |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
10000.0 AC ALL LOCATIONS |
| BBRJ |
III SPECIAL HANDLING FEATURE |
MAGNETIC |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE AND 2 UNTHREADED HOLE |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
2.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| ADAU |
BODY HEIGHT |
3.380 INCHES NOMINAL |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| FREQ |
FREQUENCY IN HERTZ |
60.0 ALL LOCATIONS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 COMPRESSION |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
4.880 INCHES NOMINAL |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.380 INCHES NOMINAL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
W-C-375/12 |
| AKPX |
POLE QUANTITY |
3 |
| ADAQ |
BODY LENGTH |
6.310 INCHES NOMINAL |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| ADAT |
BODY WIDTH |
4.105 INCHES MINIMUM AND 4.125 INCHES MAXIMUM |
| CPRJ |
TRIP RELEASE METHOD |
THERMAL-MAGNETIC ALL LOCATIONS |
