| MRC |
Requirement Statement |
Characteristics |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
27.5 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES SINGLE MOUNTING FACILITY |
| CQYJ |
MOUNTING FACILITY PATTERN |
RECTANGULAR SINGLE MOUNTING FACILITY |
| ADTV |
III CASE MATERIAL |
STEEL, CORROSION RESISTING |
| AAJD |
THREAD CLASS |
2B SINGLE MOUNTING FACILITY |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| ABMK |
OVERALL WIDTH |
0.688 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
1.156 INCHES MAXIMUM |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
3.0 AMPERES AC AND 3.0 AMPERES DC RESISTIVE LOAD 3.0 AMPERES AC AND 1.5 AMPERES DC INDUCTIVE LOAD |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AFRG |
III CONTACT MATERIAL |
SILVER |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED HOLE SINGLE MOUNTING FACILITY |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACTS SILVER |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 TAB, SOLDER LUG ALL FUNCTIONS |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND SINGLE MOUNTING FACILITY |
| CMLP |
THREAD QUANTITY PER INCH |
40 SINGLE MOUNTING FACILITY |
| AKDX |
WINDING QUANTITY |
1 |
| APNA |
WINDING DC RESISTANCE RATING |
300.0 OHMS NOMINAL SINGLE WINDING |
| CRXH |
TIME DELAY |
0.015 SECONDS MAXIMUM FIXED OPERATE TIME 0.01 SECONDS MAXIMUM FIXED RELEASE TIME |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| APCN |
COIL QUANTITY |
1 |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
115.0 AC AND 28.0 DC |
| ABKW |
OVERALL HEIGHT |
1.062 INCHES MAXIMUM |
| CBME |
III CUBIC MEASURE |
0.844 CUBIC INCHES |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
0.438 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| APNP |
DUTY TYPE |
CONTINUOUS |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
