| MRC |
Requirement Statement |
Characteristics |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
79.00 NOMINAL |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| ABPM |
BODY DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND, ROTATABLE HOUSING |
| AAVH |
SHOULDER DIAMETER |
1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJST |
ROTOR INPUT CURRENT RATING |
160.0 MILLIAMPERES NOMINAL |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
5.0 WATTS MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-10.0 TO 10.0 |
| AJSS |
FREQUENCY IN HERTZ |
50.0 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
9.783 STATOR TO ROTOR NOMINAL |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
96 SINGLE SHAFT |
| AJWR |
SHOULDER LENGTH |
0.4120 INCHES MINIMUM AND 0.4220 INCHES MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
9.500 INPUT TO OUTPUT NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.3870 INCHES NOMINAL SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
0.7390 INCHES MINIMUM AND 0.7650 INCHES MAXIMUM SINGLE SHAFT |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.240 INCHES SINGLE SHAFT |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.090 INCH-OUNCES MINIMUM |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AJSL |
BODY SIZE |
23 |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
0.15 |
| ABWV |
SHAFT DIAMETER |
0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVM |
SPLINE TOOTH QUANTITY |
22 SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
4.2940 INCHES MAXIMUM |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.8830 INCHES MAXIMUM |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
800.00 NOMINAL |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
