| MRC |
Requirement Statement |
Characteristics |
| AEFP |
NONTURN DEVICE RADIUS |
0.375 INCHES NOMINAL AT 3:00 O'CLOCK |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
0.700 TO 4.000 INCH-POUNDS SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABNC |
FLAT HEIGHT |
0.216 INCHES NOMINAL SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
50.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 25.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE 200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL 100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
150.0 AC AT SEA LEVEL 150.0 AC AT ALTITUDE 30.0 DC AT SEA LEVEL 30.0 DC AT ALTITUDE |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| AKPY |
THROW QUANTITY |
10 EACH SECTION REAR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 3:00 O'CLOCK |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| AKPX |
POLE QUANTITY |
1 EACH SECTION REAR |
| ABNB |
FIRST FLAT LENGTH |
0.312 INCHES NOMINAL SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| ADAV |
OVERALL DIAMETER |
1.094 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL SINGLE ACTUATOR |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 125.0 DEG CELSIUS |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
135.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| ABHP |
OVERALL LENGTH |
1.750 INCHES MAXIMUM |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
10 SINGLE ACTUATOR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
