| MRC |
Requirement Statement |
Characteristics |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| ABMK |
OVERALL WIDTH |
1.328 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
1.700 TO 8.000 INCH-POUNDS SINGLE ACTUATOR |
| ABKW |
OVERALL HEIGHT |
1.546 INCHES MAXIMUM |
| AKPY |
THROW QUANTITY |
8 EACH SECTION REAR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
8 SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
110.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 85.0 DEG CELSIUS |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.854 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM SINGLE ACTUATOR |
| AKPX |
POLE QUANTITY |
1 EACH SECTION REAR |
| AEFP |
NONTURN DEVICE RADIUS |
0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM AT 9:00 O'CLOCK |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
165.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| ABHP |
OVERALL LENGTH |
2.964 INCHES MAXIMUM |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
3 |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| ABNC |
FLAT HEIGHT |
0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE ACTUATOR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 9:00 O'CLOCK |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
