| MRC |
Requirement Statement |
Characteristics |
| ABNC |
FLAT HEIGHT |
0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES SINGLE MOUNTING FACILITY |
| CTHF |
CONTACT LOAD CURRENT RATING |
250.0 MILLIAMPERES RESISTIVE LOAD AND 120.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| ABXF |
SHAFT LENGTH |
0.742 INCHES MINIMUM AND 0.822 INCHES MAXIMUM SINGLE ACTUATOR |
| AKPX |
POLE QUANTITY |
1 EACH SECTION FRONT |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
45.0 DEGREES SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CSHW |
CONTACT SWITCHING ACTION |
MAKES BEFORE BREAKS EACH SECTION REAR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 3:00 O'CLOCK |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 85.0 DEG CELSIUS |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| ABNB |
FIRST FLAT LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
1 EACH SECTION |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
8.000 TO 17.000 INCH-OUNCES SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM AT 3:00 O'CLOCK |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| ABHP |
OVERALL LENGTH |
1.950 INCHES MINIMUM AND 2.096 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
5 SINGLE ACTUATOR |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| ABWV |
SHAFT DIAMETER |
0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AKPY |
THROW QUANTITY |
5 EACH SECTION REAR |
| AASA |
THREAD LENGTH |
0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
