| MRC |
Requirement Statement |
Characteristics |
| AKPX |
POLE QUANTITY |
1 EACH SECTION FRONT |
| AASA |
THREAD LENGTH |
0.370 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| ABNC |
FLAT HEIGHT |
0.210 INCHES NOMINAL SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNS SINGLE MOUNTING FACILITY |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
18 SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
SLOTTED BUSHING AT 12:00 O'CLOCK |
| CSHW |
CONTACT SWITCHING ACTION |
MAKES BEFORE BREAKS 4TH SECTION REAR MAKES BEFORE BREAKS 5TH SECTION REAR MAKES BEFORE BREAKS 6TH SECTION REAR MAKES BEFORE BREAKS 7TH SECTION REAR |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| CMLP |
THREAD QUANTITY PER INCH |
32 SINGLE MOUNTING FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.469 INCHES SINGLE MOUNTING FACILITY |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
1 EACH SECTION |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL 500.0 MILLIAMPERES RESISTIVE LOAD AND 250.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| AKPY |
THROW QUANTITY |
18 4TH SECTION REAR 18 5TH SECTION REAR 18 6TH SECTION REAR 18 7TH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL SINGLE ACTUATOR |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 125.0 DEG CELSIUS |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
20.0 DEGREES SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
7 |
| ABHP |
OVERALL LENGTH |
4.000 INCHES MAXIMUM |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL |
| ADAV |
OVERALL DIAMETER |
2.000 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
