| MRC |
Requirement Statement |
Characteristics |
| ABXF |
SHAFT LENGTH |
0.030 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABWV |
SHAFT DIAMETER |
0.083 INCHES NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0 TO 30.0 SINGLE SECTION |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.200 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
0.220 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 OHMS SINGLE SECTION |
| ABHP |
III OVERALL LENGTH |
1.020 INCHES MINIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AXGY |
MOUNTING METHOD |
TERMINAL AND UNTHREADED HOLE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES MINIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| SR-1 |
MANUFACTURERS CODE |
95542 |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
138-062-3200 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.078 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.520 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.500 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
5.00 INCH-OUNCES |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABMK |
III OVERALL WIDTH |
0.220 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| TEST |
TEST DATA DOCUMENT |
95542-138-062 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| APXH |
TERMINAL LOCATION |
REAR END |
| ADAQ |
BODY LENGTH |
0.500 INCHES NOMINAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.100 INCHES NOMINAL |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| AAPN |
SECTION QUANTITY |
1 |
| ABKW |
III OVERALL HEIGHT |
0.500 INCHES NOMINAL |
