| MRC |
Requirement Statement |
Characteristics |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
NICKEL ALLOY 625 |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.900 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| CSSR |
SECOND LEG ANGLE |
44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.900 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5599 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| FEAT |
SPECIAL FEATURES |
FURN W/CLIP |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
