| MRC |
Requirement Statement |
Characteristics |
| ADVN |
CROSS-SECTIONAL HEIGHT |
0.027 INCHES NOMINAL |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.946 INCHES MINIMUM AND 0.966 INCHES MAXIMUM |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.169 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.024 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUE |
APERTURE WIDTH |
0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.303 INCHES MINIMUM AND 1.323 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
EMI |
| AAUB |
HOLE DIAMETER |
0.135 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| ADUF |
APERTURE LENGTH |
0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.303 INCHES MINIMUM AND 1.323 INCHES MAXIMUM |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.984 INCHES MINIMUM AND 1.004 INCHES MAXIMUM |
| ADPW |
OUTSIDE CORNER RADIUS |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
EMI/RFI CONDUCTIVE PARTICLE SURFACES SILVER |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| MATT |
MATERIAL |
COPPER EMI/RFI CONDUCTOR RUBBER SILICONE CLASS Q ENVIRONMENTAL SEAL |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
| SFTT |
SURFACE TREATMENT |
SILVER EMI/RFI CONDUCTOR |
| CTNJ |
ENVIRONMENTAL PROTECTION MATERIAL LOCATION |
THROUGHOUT RF SHIELDING GASKET |
