| MRC |
Requirement Statement |
Characteristics |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| ASDB |
WIDTH ACROSS FLATS |
1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
1.115 INCHES MINIMUM AND 1.155 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AN0172 MFR REF SINGLE TREATMENT RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| BBLC |
DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT |
0.876 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
1.251 INCHES MINIMUM AND 1.291 INCHES MAXIMUM |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
12 |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ATKZ |
FIRST END THREAD LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.749 INCHES MINIMUM AND 0.758 INCHES MAXIMUM |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
1.059 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.990 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
204-040-830-3 |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.374 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| ACLK |
FIRST END THREAD CLASS |
3A |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| BBKZ |
SECOND RADIAL FLUID HOLE DIAMETER |
0.374 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
