| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 0-984085-2 | ELWELL-PARKER ELECTRIC CO | 20361 | 5 | 1 | 2 | ||||
| 11900612 | FAIRBANKS MORSE ENGINE | 82796 | 5 | 2 | 2 | ||||
| 119A4259P1 | GENERAL ELECTRIC CO | 09214 | 5 | 9 | 2 | ||||
| 119A4259P3 | GENERAL ELECTRIC CO | 02989 | 5 | 2 | 2 | ||||
| 2242C16G2 | SQUARE D CO | 51918 | 5 | 9 | 2 | ||||
| 850466 | DANA CORP | 77237 | C | 1 | 2 | C | |||
| 850466 | CLARK EQUIPMENT CO | 12603 | 5 | 9 | 2 | ||||
| 882304 | DANA CORP | 77237 | C | 1 | 2 | C | |||
| 882304 | CLARK EQUIPMENT CO | 12603 | 5 | 9 | 2 | ||||
| 9007A0-2 | SQUARE D COMPANY | 05684 | C | 1 | 2 | N | |||
| 9007A02 | SQUARE D CO | 51918 | 5 | 9 | 2 | ||||
| 9007A02 | SCHNEIDER ELECTRIC USA INC. | 56365 | 3 | 2 | 2 | ||||
| D9007A02 | CLARK EQUIPMENT CO | 12603 | 5 | 9 | 2 | ||||
| D9007A02 | DANA CORP | 77237 | C | 1 | 2 | C | |||
| SW1091 | INTRUPA MFG CO | 20149 | 5 | 1 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SCREW |
| CSJN | SWITCH ACTUATING FORCE | 10.0 OUNCES MINIMUM AND 14.0 OUNCES MAXIMUM |
| AFUS | ACTUATOR HEIGHT | 0.167 INCHES MAXIMUM |
| AFUQ | ACTUATOR STYLE | ROUND |
| ADAU | BODY HEIGHT | 1.031 INCHES NOMINAL |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | INDUSTRIAL USE |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | 1 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| ADAT | BODY WIDTH | 0.859 INCHES NOMINAL |
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | 600.0 AC AND 600.0 DC |
| AFUR | ACTUATOR DIAMETER | 0.250 INCHES NOMINAL |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 20.000 MILLIAMPERES RESISTIVE DC AND 20.000 MILLIAMPERES INDUCTIVE DC AND 15.000 AMPERES RESISTIVE AC AND 5.000 AMPERES INDUCTIVE AC |
| ABMK | OVERALL WIDTH | 0.828 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.198 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.500 INCHES NOMINAL |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.125 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.500 INCHES NOMINAL |
