| MRC |
Requirement Statement |
Characteristics |
| ABNB |
FIRST FLAT LENGTH |
0.203 INCHES NOMINAL SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL 115.0 AC AT ALTITUDE 28.0 DC AT SEA LEVEL 28.0 DC AT ALTITUDE |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.406 INCHES NOMINAL AT 1:30 O'CLOCK |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
30.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
1 |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| ABXF |
SHAFT LENGTH |
0.453 INCHES NOMINAL SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.243 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| ABHP |
OVERALL LENGTH |
1.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DUMMY CONTACTS AT POSITIONS 11 AND 12,SHAFT DRILLED AND TAPPED FOR 6-32 THD 0.125 IN. DEEP |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
2 SINGLE ACTUATOR |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
WATERTIGHT |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| AKPX |
POLE QUANTITY |
3 SINGLE SECTION REAR |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 125.0 DEG CELSIUS |
| AKPY |
THROW QUANTITY |
2 SINGLE SECTION REAR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
PIN AT 1:30 O'CLOCK |
| CTHF |
CONTACT LOAD CURRENT RATING |
100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 50.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE 200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL 100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| AATB |
WIDTH BETWEEN FLATS |
0.195 INCHES NOMINAL SINGLE ACTUATOR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
