| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 100819 | DAIMLER CHRYSLER | 12204 | 3 | 2 | 3 | ||||
| 100819 | ARMY WEAPONS COMMAND | 21450 | 5 | 2 | 3 | ||||
| 17217 | DANA CORP | 72447 | 3 | 2 | 3 | ||||
| 24622S | FORD MOTOR CO | 23040 | 5 | 9 | 3 | ||||
| A1725 | AM GENERAL LLC | 34623 | 3 | 2 | 3 | ||||
| FFS92 | FEDERAL SPECIFICATIONS | 81348 | 4 | 1 | 3 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| SR-1 | MANUFACTURERS CODE | 81348 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASA | THREAD LENGTH | 0.775 INCHES MINIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| CYAU | SCREW MATERIAL | STEEL |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FFS92 |
| AASB | FASTENER LENGTH | 0.875 INCHES NOMINAL |
