| MRC |
Requirement Statement |
Characteristics |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ABKV |
OUTSIDE DIAMETER |
0.578 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| CRDW |
HYDROSTATIC TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
0.349 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.000 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
120.000 INCHES NOMINAL OVERALL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CRSM |
VACUUM IN TORR |
254.0 |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER WOVEN FABRIC OR 1ST LAYER BRAIDED FABRIC OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| FEAT |
SPECIAL FEATURES |
REUSABLE PUSH-ON TYPE FITTING |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| CQBD |
BURST TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
