| MRC |
Requirement Statement |
Characteristics |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
99.60 KILOHERTZ BLANK AND 99.96 KILOHERTZ BLANK AND 100.04 KILOHERTZ BLANK AND 100.40 KILOHERTZ BLANK |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
100.0 KILOHERTZ BLANK |
| TEST |
TEST DATA DOCUMENT |
13499-293-0844-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| AHAU |
INPUT IMPEDANCE PER FUNCTION W/LOAD |
5.0 OHMS BLANK |
| ADAU |
BODY HEIGHT |
2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
3.0 BLANK |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| AHAV |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT |
10.0 OHMS BLANK |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG INPUT 1ST FUNCTION 2 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED STUD |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
99.96 KILOHERTZ BLANK AND 100.04 KILOHERTZ BLANK |
| ADAQ |
BODY LENGTH |
2.172 INCHES MINIMUM AND 2.204 INCHES MAXIMUM |
| AFGA |
III OPERATING TEMP RANGE |
-55.0 TO 75.0 DEG CELSIUS |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
40.00 NOMINAL BLANK AND 3.00 NOMINAL BLANK AND 3.00 NOMINAL BLANK AND 40.00 NOMINAL BLANK |
| ADAT |
BODY WIDTH |
0.875 INCHES MAXIMUM |
