| MRC |
Requirement Statement |
Characteristics |
| ADGA |
OVERALL OUTSIDE DIAMETER |
0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AGVT |
OUTER RING WIDTH |
0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.3750 INCHES NOMINAL |
| AGGY |
SHANK THREAD LENGTH |
1.1250 INCHES NOMINAL |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| AAJD |
THREAD CLASS |
2A |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| ABHP |
OVERALL LENGTH |
2.3290 INCHES MINIMUM AND 2.3590 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ONE SLOT IN LG OF THD,0.093 IN. MIN,0.098 IN. MAX,0.306 IN. MIN,0.311 IN. MAX,FROM BOTTOM OF THD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AGVU |
INNER RING WIDTH |
0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E51100 BALL STEEL COMP E51100 INNER RING STEEL COMP E51100 OUTER RING STEEL COMP E51100 ROD END BODY PLASTIC SEAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM EXPOSED SURFACES AS MOUNTED |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416. TY 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGYJ |
SEAL QUANTITY |
2 |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
