| MRC |
Requirement Statement |
Characteristics |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
4.370 INCHES MINIMUM AND 4.390 INCHES MAXIMUM |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY SINGLE LOCATION |
| ADAU |
BODY HEIGHT |
2.600 INCHES MINIMUM AND 2.620 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
4.740 INCHES MINIMUM AND 4.760 INCHES MAXIMUM |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
DUSTPROOF AND FUNGUS PROOF |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.175 MINIMUM AT 200 PCT AND 0.550 MAXIMUM AT 200 PCT SINGLE LOCATION |
| APNQ |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 SINGLE LOCATION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.164 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE AND 1 UNTHREADED HOLE |
| CPRQ |
RESET METHOD |
MANUAL |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC-HYDRAULIC SINGLE LOCATION |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
75.0 AMPERES DC SINGLE LOCATION |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
125.0 DC SINGLE LOCATION |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| ADAT |
BODY WIDTH |
1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| AKPX |
POLE QUANTITY |
1 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 COMPRESSION |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
5000.0 DC SINGLE LOCATION |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
