| MRC |
Requirement Statement |
Characteristics |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 THREADED BUSHING |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| SR-5 |
DESIGN CONTROL REFERENCE |
620A302 |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
1.376 INCHES NOMINAL |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| CPRY |
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT |
ONE, TWO, AND THREE LINKED |
| ADTV |
CASE MATERIAL |
METAL |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
120.0 AC ALL LOCATIONS |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| CPRQ |
RESET METHOD |
MANUAL |
| ADAT |
BODY WIDTH |
2.000 INCHES NOMINAL |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
MOISTURE RESISTANT AND HERMETICALLY SEALED |
| SR-5 |
MANUFACTURERS CODE |
81541 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.150 MINIMUM AT 200 PCT AND 0.800 MAXIMUM AT 200 PCT ALL LOCATIONS |
| FREQ |
FREQUENCY IN HERTZ |
400.0 ALL LOCATIONS |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 ALL LOCATIONS |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
500.0 AC ALL LOCATIONS |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
3 TOGGLE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 WIRE HOOK |
| ABXD |
BUSHING LENGTH |
0.490 INCHES NOMINAL |
| AKPX |
POLE QUANTITY |
3 |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| ADAQ |
BODY LENGTH |
1.760 INCHES MAXIMUM |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
3.0 AMPERES AC ALL LOCATIONS |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT EACH POLE |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
0.450 INCHES MAXIMUM |
