| MRC |
Requirement Statement |
Characteristics |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
3 SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
60.0 DEGREES SINGLE ACTUATOR |
| ADAV |
OVERALL DIAMETER |
1.170 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
1.124 INCHES NOMINAL SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 85.0 DEG CELSIUS |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| ABHP |
OVERALL LENGTH |
3.187 INCHES NOMINAL |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
2.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL 1.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| AKPY |
THROW QUANTITY |
3 EACH SECTION REAR |
| AFDC |
NONTURN DEVICE TYPE |
SLOTTED BUSHING AT 3:00 O'CLOCK |
| AKPX |
POLE QUANTITY |
2 EACH SECTION FRONT |
| ABNC |
FLAT HEIGHT |
0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
4 |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
2 EACH SECTION |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
