| MRC |
Requirement Statement |
Characteristics |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
40.000 MINIMUM AT 200 PCT AND 18.000 MAXIMUM AT 300 PCT SINGLE LOCATION |
| CPRW |
ACTUATOR FUNCTION |
RESET |
| ADAT |
BODY WIDTH |
0.730 INCHES NOMINAL |
| CRCF |
TRIP RELEASE AMBIENT TEMP RATING |
20.0 DEG CELSIUS NOMINAL SINGLE LOCATION |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| ABHP |
OVERALL LENGTH |
1.960 INCHES NOMINAL |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT |
| CPRQ |
RESET METHOD |
MANUAL |
| FREQ |
FREQUENCY IN HERTZ |
60.0 SINGLE LOCATION |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
10.0 AMPERES AC AND 10.0 AMPERES DC SINGLE LOCATION |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.000 INCHES NOMINAL |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
100.0 SINGLE LOCATION |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
INSTANTANEOUS AND TIME DELAY SINGLE LOCATION |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.370 INCHES NOMINAL |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC SINGLE LOCATION |
| AKPX |
POLE QUANTITY |
1 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.170 INCHES NOMINAL |
| CPRJ |
TRIP RELEASE METHOD |
THERMAL SINGLE LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
100.0 AC AND 100.0 DC SINGLE LOCATION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.157 INCHES NOMINAL |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 PUSH BUTTON |
