| MRC |
Requirement Statement |
Characteristics |
| CBME |
(NON-CORE DATA) CUBIC MEASURE |
0.040 CUBIC INCHES |
| ADAT |
BODY WIDTH |
0.240 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AARA |
TERMINAL QUANTITY |
14 |
| STYL |
STYLE DESIGNATOR |
DUAL INLINE |
| AAQG |
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER |
125.0 |
| AAPQ |
RESISTANCE TOLERANCE IN PERCENT |
-2.000 TO 2.000 EACH RESISTOR |
| AAPP |
ELECTRICAL RESISTANCE |
680.000 OHMS EACH RESISTOR |
| CQRD |
IDENTICAL VALUE RESISTOR QUANTITY |
13 EACH RESISTOR |
| AAQZ |
INCLOSURE METHOD |
ENCAPSULATED |
| AARB |
TERMINAL TYPE |
PIN |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFB |
POWER DISSIPATION RATING IN WATTS |
1.500 TOTAL NETWORK |
| AAQH |
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS |
-55.0 TO 125.0 |
| ABJT |
TERMINAL LENGTH |
0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AAQF |
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER |
25.0 |
| TEST |
TEST DATA DOCUMENT |
32562-471-1000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AAPE |
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS |
-100.0 TO 100.0 |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
LADDER NETWORK |
| ADAQ |
BODY LENGTH |
0.695 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.200 INCHES MAXIMUM |
| PKWT |
III UNPACKAGED UNIT WEIGHT |
1.3 GRAMS |
