| MRC |
Requirement Statement |
Characteristics |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AHNC |
CONNECTION STYLE |
PLAIN OPTIONAL END 1ST END INVERTED FLARE 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
0.480 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AARX |
INSIDE DIAMETER |
0.188 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON AND AIR AND WATER SINGLE RESPONSE |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.125 INCHES 1ST END 0.125 INCHES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 1ST END NPT 2ND END |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL PIPE 1ST END THREADED EXTERNAL PIPE 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
31.000 INCHES NOMINAL OVERALL |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
0.750 INCHES |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
