| MRC |
Requirement Statement |
Characteristics |
| AJSL |
BODY SIZE |
8 |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
180.00 NOMINAL |
| CQZS |
SHAFT SLOT DEPTH |
0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
625.00 NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
10.800 INPUT TO OUTPUT NOMINAL |
| CWYF |
III SHAFT END PLAY DETERMINING WEIGHT |
8.0 OUNCES |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
428.00 NOMINAL |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
3912.00 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
1.907 ROTOR TO STATOR NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
33.0 MILLIWATTS NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
887.00 NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 WIRE LEAD |
| ABPA |
UNDERCUT DIAMETER |
0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
956.00 NOMINAL |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJSP |
STATOR INPUT CURRENT RATING |
14.0 MILLIAMPERES NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| AJSY |
ZSO RESISTANCE IN OHMS |
230.00 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.3660 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJTA |
ZRS RESISTANCE IN OHMS |
1224.00 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2400 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| CRHN |
SHAFT SLOT WIDTH |
0.0200 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
1.6240 INCHES MAXIMUM |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
4.0 CENTIMETER-GRAMS NOMINAL |
| AJWH |
III SHAFT END PLAY |
0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
