| MRC |
Requirement Statement |
Characteristics |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
900.0 HERTZ BLANK |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
3.0 BLANK |
| CQRG |
III BODY MATERIAL |
METAL |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| ADAT |
BODY WIDTH |
3.000 INCHES NOMINAL |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
860.00 HERTZ BLANK AND 880.00 HERTZ BLANK AND 920.00 HERTZ BLANK AND 940.00 HERTZ BLANK |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
3.000 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
2.750 INCHES NOMINAL |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
40.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK AND 3.0 MAXIMUM BLANK AND 40.0 MINIMUM BLANK |
| AHAV |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT |
13.0 KILOHMS BLANK |
| AHAU |
INPUT IMPEDANCE PER FUNCTION W/LOAD |
13.0 KILOHMS BLANK |
| TEST |
TEST DATA DOCUMENT |
97942-579R629H03 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ADAQ |
BODY LENGTH |
3.718 INCHES NOMINAL |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
880.00 HERTZ BLANK AND 920.00 HERTZ BLANK |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 SOLDER STUD INPUT 1ST FUNCTION 1 SOLDER STUD GROUND 3RD FUNCTION |
| ABHP |
OVERALL LENGTH |
4.880 INCHES MAXIMUM |
