| MRC |
Requirement Statement |
Characteristics |
| ABKV |
OUTSIDE DIAMETER |
0.425 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| AARX |
INSIDE DIAMETER |
0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQBD |
BURST TEST PRESSURE |
1200.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
10.000 INCHES NOMINAL WORKING |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
0.500 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY, AMS 4117, ALLOY 6061, T6 NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 SOCKET,ALUMINUM ALLOY,AMS 4115 COMP 6061,TEMPER 0 |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NUT ANODIZED, MIL-A-8625 SOCKET ANODIZED, MIL-A-8625 |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 350.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |
