| MRC |
Requirement Statement |
Characteristics |
| CQFM |
HARDNESS RATING |
59.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM |
| AAWX |
CONCENTRIC HOLE DEPTH |
3.125 INCHES NOMINAL |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
2.312 INCHES NOMINAL |
| ATKZ |
FIRST END THREAD LENGTH |
1.312 INCHES NOMINAL |
| BBKT |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER |
2.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633,FS1020 OR FS1117 FED SPEC SINGLE MATERIAL RESPONSE |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| AAQL |
BODY STYLE |
RELIEVED |
| BBKP |
FOURTH DIAMETER FROM WRENCHING FEATURE |
0.748 INCHES NOMINAL |
| ACLS |
SECOND END CONNECTION TYPE |
THREADED INTERNAL PIPE |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
NPT |
| BBKN |
THIRD DIAMETER FROM WRENCHING FEATURE |
0.717 INCHES MINIMUM AND 0.727 INCHES MAXIMUM |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.156 INCHES NOMINAL |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
16 |
| BBKM |
SECOND DIAMETER FROM WRENCHING FEATURE |
0.748 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
6.500 INCHES NOMINAL |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
6.000 INCHES NOMINAL |
| ACKN |
FIRST END STYLE DESIGNATOR |
PLAIN |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.500 INCHES NOMINAL |
| ACLT |
SECOND END STYLE DESIGNATOR |
PLAIN |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.156 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AASL |
HEAD DIAMETER |
1.062 INCHES NOMINAL |
| ACLK |
FIRST END THREAD CLASS |
2A |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.748 INCHES NOMINAL |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.438 INCHES NOMINAL |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
3.500 INCHES NOMINAL |
| BBKW |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER |
4.688 INCHES NOMINAL |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.750 INCHES |
| BBDF |
WRENCHING FEATURE STYLE |
ROUND |
