| MRC |
Requirement Statement |
Characteristics |
| CQHQ |
MINIMUM YIELD STRENGTH |
130000 POUNDS PER SQUARE INCH |
| AASL |
HEAD DIAMETER |
0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABQJ |
POINT STYLE |
CHAMFER DOG |
| AAJD |
THREAD CLASS |
2A |
| ASDB |
WIDTH ACROSS FLATS |
0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
93221 |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| SR-5 |
DESIGN CONTROL REFERENCE |
735879-2 |
| AAUY |
POINT LENGTH |
0.107 INCHES MINIMUM AND 0.148 INCHES MAXIMUM |
| AAVA |
POINT DIAMETER |
0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CWDK |
POINT CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.263 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
