| MRC |
Requirement Statement |
Characteristics |
| CRHN |
SHAFT SLOT WIDTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJSL |
BODY SIZE |
8 |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
22.00 OUTPUT |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2410 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
46.0 MILLIWATTS MINIMUM AND 70.0 MILLIWATTS MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
9.200 INPUT TO OUTPUT NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
89.00 MINIMUM AND 127.00 MAXIMUM |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
102.00 MINIMUM AND 138.00 MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
2340.00 MINIMUM AND 2860.00 MAXIMUM |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
255.00 MINIMUM AND 345.00 MAXIMUM |
| AJSW |
ZRO RESISTANCE IN OHMS |
796.00 MINIMUM AND 1076.00 MAXIMUM |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
16.0 CENTIMETER-GRAMS NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.4850 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-15.0 TO 15.0 |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| ABKK |
FLANGE DIAMETER |
0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.7260 INCHES MINIMUM AND 1.7560 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 WIRE LEAD |
| AJTA |
ZRS RESISTANCE IN OHMS |
945.00 MINIMUM AND 1265.00 MAXIMUM |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
30.00 |
| CQTM |
TERMINAL LOCATION |
REAR |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
4.0 CENTIMETER-GRAMS NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
382.00 MINIMUM AND 517.50 MAXIMUM |
| AJSP |
STATOR INPUT CURRENT RATING |
24.2 MILLIAMPERES MAXIMUM |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
616.00 MINIMUM AND 834.00 MAXIMUM |
