| MRC |
Requirement Statement |
Characteristics |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.500 INCHES NOMINAL 1ST END 1.188 INCHES NOMINAL 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRFY |
FLOW ANGLE |
22.5 DEGREES 1ST END 67.5 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END PLAIN FACE FLANGE 2ND END |
| ABKU |
FLANGE THICKNESS |
0.270 INCHES NOMINAL 1ST END 0.270 INCHES NOMINAL 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRXX |
MEASURING METHOD AND LENGTH |
37.000 INCHES NOMINAL WORKING |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END ELBOW 2ND END |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING DICHROMATE |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END SOLID 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED COTTON CORD OUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC |
| ABKV |
OUTSIDE DIAMETER |
0.922 INCHES NOMINAL |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
90.0 |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 1ST END ROUND W/ OUT BOLT HOLES 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING DICHROMATE |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
COLD RESISTANT AND OIL RESISTANT |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADJS |
EXTERIOR COLOR |
BLACK |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.000 INCHES |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
