| MRC |
Requirement Statement |
Characteristics |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJD |
THREAD CLASS |
2A |
| AASL |
HEAD DIAMETER |
0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FILLISTER |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
AN501D0-6 |
| AASU |
HEAD HEIGHT |
0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| AASB |
FASTENER LENGTH |
0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CYAU |
SCREW MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.060 INCHES |
| CYBA |
SCREW SURFACE TREATMENT |
PASSIVATE |
| CMLP |
THREAD QUANTITY PER INCH |
80 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASA |
THREAD LENGTH |
0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SR-1 |
MANUFACTURERS CODE |
88044 |
| CQBC |
MINIMUM TENSILE STRENGTH |
60000 POUNDS PER SQUARE INCH |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE AND 4S STYLE |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FFS92 |
