| MRC |
Requirement Statement |
Characteristics |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| ADAQ |
BODY LENGTH |
1.464 INCHES MINIMUM AND 1.526 INCHES MAXIMUM |
| ADTV |
CASE MATERIAL |
METAL |
| APNQ |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.870 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CPRQ |
RESET METHOD |
MANUAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 WIRE HOOK |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
1.000 MINIMUM AT 200 PCT AND 3.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
500.0 AC FIRST LOCATION 500.0 DC SECOND LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| AAJE |
THREAD PITCH DIAMETERS |
0.3503 TO 0.3537 INCHES |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.647 INCHES MINIMUM AND 1.709 INCHES MAXIMUM |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| ADAT |
BODY WIDTH |
1.841 INCHES MINIMUM AND 1.906 INCHES MAXIMUM |
| ABXD |
BUSHING LENGTH |
0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
115.0 ALL LOCATIONS |
| FREQ |
FREQUENCY IN HERTZ |
400.0 FIRST LOCATION |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
HERMETICALLY SEALED |
| AKPX |
POLE QUANTITY |
2 |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
15.0 AMPERES AC FIRST LOCATION 10.0 AMPERES DC SECOND LOCATION |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
120.0 AC FIRST LOCATION 50.0 DC SECOND LOCATION |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
