| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
30.000 INCHES NOMINAL WORKING |
| AAJD |
THREAD CLASS |
2B 1ST END 2B 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT |
| ABKV |
OUTSIDE DIAMETER |
1.750 INCHES NOMINAL |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
10.500 INCHES |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| CQBD |
BURST TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UN 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END 12 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
ACETYLENE AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
1.380 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD 2ND LAYER BRAIDED STEEL WIRE 3RD LAYER BRAIDED COTTON CORD OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 1ST END 1.875 INCHES 2ND END |
| CRSM |
VACUUM IN TORR |
381.0 |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADJS |
EXTERIOR COLOR |
BLACK |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
