| MRC |
Requirement Statement |
Characteristics |
| HEAT |
HEAT TREATMENT |
ANNEALED OVERALL |
| ABAJ |
LUBRICATION |
GREASE FILM |
| AASB |
FASTENER LENGTH |
0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE |
SHANK DIAMETER |
0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT CADMIUM AND PASSIVATE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.626 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416,TY 2,CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SR-5 |
DESIGN CONTROL REFERENCE |
BA10A13F |
| MATT |
MATERIAL |
STEEL COMP 8740 BODY STEEL COMP 304 SLEEVE STEEL COMP 8740 STEM |
| SR-5 |
MANUFACTURERS CODE |
92215 |
| CQSX |
SHEAR STRENGTH |
146000 DOUBLE POUNDS PER SQUARE INCH |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
