| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-6855 CL 1 GRADE 60 MIL SPEC 4TH MATERIAL RESPONSE SEAL MIL-S-866 MIL SPEC 3RD MATERIAL RESPONSE WASHER |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES |
| ADEC |
PLATE WIDTH |
1.078 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.175 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ACTA |
NUT STYLE |
PLATE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CQFM |
HARDNESS RATING |
NOT RATED |
| SR-5 |
MANUFACTURERS CODE |
81205 |
| ACVN |
NUT LENGTH |
1.531 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT ANODIZE SHELL CADMIUM WASHER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE NUT MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE SHELL QQ-P-416 TY 2 CL 3 FED SPEC 3RD TREATMENT RESPONSE WASHER |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL NUT RUBBER SYNTHETIC SEAL ALUMINUM ALLOY 5086 SHELL STEEL COMP 1137 WASHER |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADEA |
NUT HEIGHT |
0.652 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
BACN10RMS |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABKW |
OVERALL HEIGHT |
1.137 INCHES MAXIMUM |
| AZKQ |
TEMP RATING |
-80.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
