| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT PASSIVATE NUT PASSIVATE SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM BOLT 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM NUT |
| AASB |
FASTENER LENGTH |
0.968 INCHES MINIMUM AND 0.998 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.325 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE BOLT AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE NUT AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAZE |
SHANK DIAMETER |
0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
IRON ALLOY 660 BOLT IRON ALLOY 660 NUT IRON ALLOY 660 SLEEVE |
| ANEE |
GRIP LENGTH |
0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED MANDREL |
| SR-5 |
DESIGN CONTROL REFERENCE |
BCV5A5F |
| SR-5 |
MANUFACTURERS CODE |
92215 |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
