| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 10LX1 15-16 | INCOM INTL INC | 71041 | 3 | 2 | 5 | ||||
| BH10X1 15-16 | INCOM INTL INC | 71041 | 5 | 9 | 5 | ||||
| CL25- 1 15/16 | MCGILL MANUFACTURING COMPANY INC | 92563 | 5 | 2 | 5 | ||||
| CL25- 1 15/16 | MCGILL MANUFACTURING COMPANY INC | 39317 | 5 | 9 | 5 | ||||
| PB200-1 15-16 | GREERCO CORP | 72907 | 5 | 9 | 5 | ||||
| PB200X1 15-16 | EMERSON ELECTRIC CO | 71176 | 5 | 9 | 5 | ||||
| PL3Y231N | REXNORD INDUSTRIES INC | 19382 | 3 | 2 | 5 | ||||
| PLY231N | REXNORD INDUSTRIES INC | 19382 | 5 | 9 | 5 | ||||
| RAK1 15/16 | TIMKEN AEROSPACE INC | 21335 | 3 | 2 | 5 | ||||
| S531M | STEPHENS-ADAMSON INC | 57448 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ANKF | SEAL LOCATION | BOTH ENDS |
| AFWC | HOUSING HEIGHT | 4.5000 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
| MATT | MATERIAL | IRON CAST HOUSING STEEL AND WOOL SEAL |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| ABTD | MOUNTING SLOT WIDTH | 0.6875 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.6875 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AMCL | BLOCK TYPE | FIXED |
| ABXV | BORE DIAMETER | 1.9375 INCHES NOMINAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.1875 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | OPEN |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.3750 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.0000 INCHES MINIMUM AND 6.5000 INCHES MAXIMUM |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AFWE | HOUSING WIDTH | 8.1250 INCHES NOMINAL |
| AGNF | BASE LENGTH | 2.3750 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.8750 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
