| MRC |
Requirement Statement |
Characteristics |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE STEEL, CORROSION RESISTING |
| CQRB |
SEAT ANGLE |
33.0 DEGREES 1ST END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CWFD |
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED |
0.750 INCHES 2ND END |
| CRFY |
FLOW ANGLE |
135.0 DEGREES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.750 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END STRAIGHT 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END |
| ZZZV |
FSC APPLICATION DATA |
F111 ACFT ENG OIL AND FUEL DRAIN LINE INSTL |
| FEAT |
SPECIAL FEATURES |
FLEXIBLE CORRUGATED TUBING 1.75 IN. FROM PLAIN END,1.25 IN. OD,0.75 ID,SPRING RATE 100 LB/IN: DUMP VALVE DRAIN TUBE ASSY |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END UNTHREADED EXTERNAL TUBE 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
6.140 INCHES NOMINAL WORKING |
| AARX |
INSIDE DIAMETER |
0.680 INCHES NOMINAL |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
STEEL, CORROSION RESISTING OR CRES TYPE 321 |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NUT STEEL, CORROSION RESISTING |
